| 产品特性：耐磨 | 是否进口：否 | 产地：泰科纳 |
| 厂家(产地)：泰科纳 | 牌号：AF35-02-US | 销售方式：品牌经销 |
| 类型：标准料 | 品名：pa66 | 加工级别：注塑级、 挤出级 |
| 特性级别：增韧级、 增强级、 热稳定性、 耐低温、 抗紫外线、 标准级、 耐磨、 抗静电、 抗化学性、 高强度、 高流动、 高抗冲 | 用途级别：通用级、 汽车部件、 管材级、 电子电器部件、 薄膜级、 纤维、 瓶盖专用料、 电线电缆级、 电动工具配件、 薄壁制品 | 品牌：泰科纳 |
| 产品规格：PA66 |
特点：泰科纳 PA66 AF35-02-US 是一个含35%的芳族聚酰胺纤维尼龙66树脂。
Celstran PA66 AF35-02-US
CELSTRAN? PA66-AF35-01 AF3003 NATURAL 6M
CELSTRAN? PA66-AF35-02 AF3003 NAT
CELSTRAN? PA66-AF35-02 AF3003 NAT 6MM
CELSTRAN? PA66-AF35-02 AF3003 NATURAL 6M
CELSTRAN PA66-AF35-02-US | PA66 | Aramid Reinforced
Description
PA66 with 35% aramid fiber by weight
Other Processing
Injection Molding
Celstran can be processed on a standard injection molding unit. A general purpose metering screw is recommended with a zone distribution of 40% feed, 40% transition, and 20% metering. A free flowing check ring assembly is recommended.
Melt Temp：305-310℃.
Mold Temp：85-95℃.
ISO Data | Physical properties | Value | Unit | Test Standard |
Phys | Density | 1220 | kg/m? | ISO 1183 |
Mech | Tensile modulus (1mm/min) | 9200 | MPa | ISO 527-2/1A |
Tensile stress at break (5mm/min) | 120 | MPa | ISO 527-2/1A | |
Tensile strain at break (5mm/min) | 1.86 | % | ISO 527-2/1A | |
Flexural modulus (23℃) | 7800 | MPa | ISO 178 | |
Flexural strength (23℃) | 180 | MPa | ISO 178 | |
Charpy notched impact strength @ 23℃ | 15 | kJ/m? | ISO 179/1eA | |
Therm | DTUL @ 1.8 MPa | 246 | ℃ | ISO 75-1/-2 |
Processing
Pre Drying
Necessary low maximum residual moisture content: 0.18%
CELSTRAN PA should in principle be predried. Because of the necessary low maximum residual moisture content the use of dry air dryers is recommended. The dew point should be =<-30℃. The time between drying and processing should be as short as possible.
Note: Material can be over dried and may discolor.
Drying time (h)：2-4
Drying temperature (℃)：70-80
