| 产品特性：耐磨 | 是否进口：否 | 产地：泰科纳 |
| 厂家(产地)：泰科纳 | 牌号： GF30-07 | 销售方式：品牌经销 |
| 类型：标准料 | 品名：pa66 | 加工级别：注塑级、 挤出级 |
| 特性级别：阻燃级、 增韧级、 耐高温、 耐低温、 导电级、 标准级、 耐水解、 耐磨、 耐候、 抗静电、 高流动、 高抗冲 | 用途级别：食品级、 通用级、 汽车部件、 光学级、 管材级、 电子电器部件、 运动器材、 瓶盖专用料、 流延膜专用料、 家电部件 | 品牌：泰科纳 |
| 产品规格：pa66 |
特点：泰科纳 PA66 GF30-07 是一个含有30%长玻璃纤维增强和良好流动性的尼龙66树脂。
Celstran PA66 GF30-07
CELSTRAN PA66-GF30-07 | PA66 | Glass Reinforced
Description
30% Long Glass Reinforced, Flow Enhanced, Nylon 66
Other Processing
Injection Molding
Celstran can be processed on a standard injection molding unit. A general purpose metering screw is recommended with a zone distribution of 40% feed, 40% transition, and 20% metering. A free flowing check ring assembly is recommended.
Melt Temp：275-285℃.
Mold Temp：85-95℃.
ISO Data | Physical properties | Value | Unit | Test Standard |
Phys | Density | 1360 | kg/m? | ISO 1183 |
Mech | Tensile modulus (1mm/min) | 9500 | MPa | ISO 527-2/1A |
Tensile stress at break (5mm/min) | 160 | MPa | ISO 527-2/1A | |
Tensile strain at break (5mm/min) | 1.91 | % | ISO 527-2/1A | |
Flexural modulus (23℃) | 9000 | MPa | ISO 178 | |
Flexural strength (23℃) | 242 | MPa | ISO 178 | |
Charpy notched impact strength @ 23℃ | 15 | kJ/m? | ISO 179/1eA |
Processing
Pre Drying
Necessary low maximum residual moisture content: 0.18%
CELSTRAN PA should in principle be predried. Because of the necessary low maximum residual moisture content the use of dry air dryers is recommended. The dew point should be =<-30℃. The time between drying and processing should be as short as possible.
Note: Material can be over dried and may discolor.
Drying time (h)：2-4
Drying temperature (℃)：70-80
