| 产品特性：耐磨 | 是否进口：否 | 产地：泰科纳 |
| 厂家(产地)：泰科纳 | 牌号：GF30-02 | 销售方式：品牌经销 |
| 类型：标准料 | 品名：PA66 | 加工级别：注塑级、 挤出级、 脱模级 |
| 特性级别：阻燃级、 增韧级、 热稳定性、 耐高温、 耐磨 | 用途级别：通用级、 管材级、 电子电器部件、 运动器材、 纤维 | 品牌：泰科纳 |
| 产品规格：pa66 |
特点：泰科纳 PA66 GF30-02 是一个含有30%长玻璃纤维增强和热稳定剂的尼龙66树脂。
Celstran PA66 GF30-02
CELSTRAN? PA66-GF30-02 AD3002 BLACK
CELSTRAN? PA66-GF30-02 AD3004 BLACK
CELSTRAN? PA66-GF30-02 AD3020 BLACK
CELSTRAN? PA66-GF30-02 AD3024 BLACK
CELSTRAN? PA66-GF30-02 AF3001 NAT P11
CELSTRAN? PA66-GF30-02 AF3001 NATURAL
CELSTRAN? PA66-GF30-02 AF3001 NATURAL 9M
CELSTRAN PA66-GF30-02 | PA66 | Glass Reinforced
Description
30% long glass fiber reinforced, heat stabilized, Nylon 6/6
Other Processing
Injection Molding
Celstran can be processed on a standard injection molding unit. A general purpose metering screw is recommended with a zone distribution of 40% feed, 40% transition, and 20% metering. A free flowing check ring assembly is recommended.
Melt Temp：290-295℃.
Mold Temp：85-95℃.
ISO Data | Physical properties | Value | Unit | Test Standard |
Phys | Density | 1360 | kg/m? | ISO 1183 |
Mech | Tensile modulus (1mm/min) | 9700 | MPa | ISO 527-2/1A |
Tensile stress at break (5mm/min) | 170 | MPa | ISO 527-2/1A | |
Tensile strain at break (5mm/min) | 2.1 | % | ISO 527-2/1A | |
Flexural modulus (23℃) | 9000 | MPa | ISO 178 | |
Flexural strength (23℃) | 280 | MPa | ISO 178 | |
Charpy notched impact strength @ 23℃ | 23 | kJ/m? | ISO 179/1eA | |
Therm | DTUL @ 1.8 MPa | 252 | ℃ | ISO 75-1/-2 |
Processing
Pre Drying
Necessary low maximum residual moisture content: 0.18%
CELSTRAN PA should in principle be predried. Because of the necessary low maximum residual moisture content the use of dry air dryers is recommended. The dew point should be =<-30℃. The time between drying and processing should be as short as possible.
Note: Material can be over dried and may discolor.
Drying time (h)：2-4
Drying temperature (℃)：70-80
